Revised Improved Hellcat hunting rig and two standard ALICEs

 

 

 

OK I revised my Improved Hellcat pack, making it for a hunting rig, and moved the ALICE pack up to the top, and inserted a MSS bag that has a GI Intermediate Cold Weather sleeping bag (from the 80s, synthetic version of the M1949 mummy sleeping bag), and attached a gun scabbard to the right of the pack, and two canteens on the opposite to balance it out somewhat. I think this pack should be decent for hunting or target shooting, with a standard hunting carbine in the scabbard (SKS is inserted, but for hunting, it would have a flush 5 round magazine for Oregon State laws)

DSCN1708

pack with MSS bag on bottom, SKS scabbard, and two canteens, along with filleting knife. I also added a webbing carry handle to the top, which also loops through the Tri-Glides of the load lifter straps so as to prevent accidentally undoing them.

DSCN1707view of the pack from the back; you can see how I moved the load lifter straps to the outboard top slots, and the webbing handle inserted through the same slots

DSCN1709

view of the canteen side; the top canteen has a camelbak straw inserted into a canteen cap I modified by drilling a hole teeny bit smaller than the straw’s outside diameter, this allows a friction fit and prevents accidental leaks

DSCN1710the gun scabbard side, while there is room on the scabbard itself for pouches, I have decided not to put anything on the scabbard, so as to keep the balance of the load as reasonable as possible.

DSCN1713here, you can see the Improved Hellcat hunting rig between two standard  ALICE packs, the one on the left hand side has a green buttpack installed on the bottom, it is a mid 80s, early 90s ALICE MEDIUM pack. The other one on the far right, is a very early model, 1974 contract I believe, the buckles are cam/spring loaded friction buckles, and the fabric has faded quite significantly, it has two 2 qt canteens, one on each side, and a M1967 sleep carrier holding a camo compression sack.

DSCN1711

you can see how the frames and the straps are different between the 3, the one on the Left, has the old style ALICE LC ruck straps, 2nd generation I believe with two quick releases rather than one like the 1st generation, the shoulder padding is short on this set, while the set on the one to the Right of the Hellcat are generally considered 3rd generation LC-2 straps, the padding on these are much longer, going from pack attachment all the way past the quick release hardware, it is similar to Tactical Tailor’s Super Straps, but without sternum straps. the kidney pads on the two Standard ALICE Mediums are missing belt portions, the one on the Right used to have a roll pin type of attachment for the belt webbing.

I might modify one of the standard ALICE packs to have Desert Camo MOLLE straps and belt, not sure which one yet.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s