Pole mod for the Long Ogee Tarp!

Decided to see how tent pole sections work with the Long Ogee tarp over a hammock!

4 sections of ~21″ tent pole with shock cord; tied to tie outs via Paracord

Long Ogee Tent Pole Mod 1

It looks like the ENO DryFly with doors… only 4 stakes!

Long Ogee Tent Pole Mod 2

Sideways view; I used the green tree straps with hooks for the tarp attachment, and did a truckers hitch on one side to get it taut.

Long Ogee Tent Pole Mod 3

how it looks from the inside, with whoopie sling attached to tree strap;

Long Ogee Tent Pole Mod 4

Sorry for little blurry pic, I couldn’t find my mitten hooks or webbing pockets, so I used the paracord sections to tie the pole sections to the tie outs

Long Ogee Tent Pole Mod 5

View of the interior from the hammock.


Long Ogee tarp, 5 alternate set ups!

Decided to do 5 different set ups with this one tarp!

Long Ogee Alt Set up 1A

A-frame with gables; same tarp, turned 90 degrees, and staked at 4 points!

Long Ogee Alt Set up 1B

Another view of the A-frame set up. Could also be used for hammocking!

Long Ogee Alt Set up 1C

Sideways view

Long Ogee Alt Set up 2A

Ground mode; drop one end down to the ground and move two stakes to the center loops; this is roomy and low.

Long Ogee Alt Set up 2B

view of the interior of the ground mode. it kinda looks like a wing or something.

Long Ogee Alt Set up 3A

Different ground mode set up; this time using the long ridge line

Long Ogee Alt Set up 3B

3 stakes on the back plus the two side wing stakes. should be enough room for 2 people plus their gear…

Long Ogee Alt set up 4A

similar set up, with same number of stakes, different locations, plus the poles and their guy lines

Long Ogee Alt Set up 4B

Angled view of the alt set up.

Long Ogee Alt Set up 4C

basically a modified diamond set up; the 2 corner stakes from the previous set up has been moved to the tie outs where the triangles attach to the main panel.

Long Ogee Alt set up 5A

Here is a much smaller, more protected set up. Basically half a Pup tent and half an A-frame tent. The extra material to one side of the two triangles have been folded under after staking down the corners.

Long Ogee Alt Set up 5B

Another view, you can see that the head and foot ends are not totally covered from one side, but they are covered amply by the triangles. I could move the awning up to another set of poles if I wanted to.

Long Ogee Alt Set up 5C

View to the inside of this small set up. In theory, two people could share the space, but realistically its great for one person and his/her gear.

Hope you enjoyed this post! 🙂

Long Ogee Batwing tarp done!

After ordering 6 yards of 58″ wide fabric and 3/4″ crosgrain webbing from [url]www.ripstopbytheroll.com[/url] ; I went and made a longer/larger version of the Ogee Batwing tarp! Took me several hours of cutting, and then sewing the hems and attaching tie outs, but I think the end result is pretty decent! I received 18 feet 8 inches of fabric, so that allowed me a little more latitude for the ridge line length and overall width…

Specs are as follows;

1.1 Oz Khaki Silnylon, 6 yards

16 tie outs of 3/4″ crosgrain webbing, sewn to hems with straight stitches, 4 lines minimum, some tie outs are X-in-box attached (corners and ridgeline tie outs)

overall length, roughly 18 feet 4 inches, width, roughly 11 feet 4 inches

Long Ogee Tarp 1

Set up with poles, I set it up first with one triangle staked down, then the poles, then the final triangle staked down, and then attached guy lines to open up the ends and stake the doors down. In a camping situation, I would start with ridgeline first, and tension it as much as possible, before staking the sides down.

Long Ogee tarp 2

end view

Tieout detail

side tie out detail; it’s stitched right into the hems

Tarp pouch 4.5x4.5x3

Amazingly, the entire tarp all fits into this 4.5″x4.5″x3″ shotgun ammo pouch, also made by me!  No guylines and no stakes, those would travel in a different pouch.