Built a large lumbar pack for the 1st generation MOLLE (MOLLE I) ruck waistbelt; as the belt is quite sturdy and has attachments which allows the user to attach an ALICE buttpack to it. Materials; 1000D Cordura Nylon in Tactical Tailor Olive Green; 1″ Nylon webbing in OD #7, ITW-Nexus hardware. Approximately 740 cubic inches, a little over 12 liters.
The large MOLLE Lumbar pack on the 1st gen MOLLE belt
Side view
Upper view
Shown with 1980s ALICE OD butt pack, and 1990s-2000s ALICE/MOLLE butt pack (really is ALICE but were issued with the 1st gen MOLLE items)
Close up of the top 1.5″ triglide mounts to stabilize the lumbar pack to the 1.5″ webbing
I also made a set of V strap adapters to interface with Tactical Tailor’s padded MAV harness; and to enable users to attach to the 1st gen MOLLE waist belts, of both types
Shown attached to the MOLLE I Ruck waist belt; You can see how the waist belt has the hardware for the ALICE butt pack, with metal loops for the woodland butt pack’s lashing straps.
On a standard 3 piece MOLLE I utility belt; they are commonly found either missing the 1.5″ vertical webbing, or with a different belt attached (either SPEAR ELCS or MOLLE II). The outboard sleeves are nearly identical to the SPEAR ELCS H harness pieces, only they have 3 metal rectangle loops to connect the 1st generation vest panels.
Close up of the adapter. I used ITW-Nexus’ Strap dividers for 1.5″ webbing, 1.5″ webbing tapered to points, and sewn to 1″ webbing.
Close up of the lower ends of the V straps, using 1″ Tri-glides and utilizing 3 of the waist belt’s metal loops (There are a total of 12; 6 per side, for adjusting where the vest panels go)
Pouch/pack attached, 2x Combat Medic Vest system triple ammo pouches, 2x canteen covers, 2x Tactical Tailor Large utility pouches, 1x Tactical Tailor Zippered medic pouch, and the lumbar pack.
Showing the gap between the pouches for the 1″ webbing to go through.
Upper view with belt standing up
On Utility belt; with all 3 sections adjusted smallest possible; from outboard to center; 2x Grenade pouches, 2x CMVS triple ammo pouches, 2x Canteen pouches, 1x SAW 100rd pouch with old ALCIE?M1967 Jungle First Aid Kit’s plastic box insert. This set up is very similar to the ELCS H Harness, or Eagle DFLCS H harness, or any of the older PLCE/H-Harness rigs offered by Eagle, London Bridge Trading Company, Blackhawk! Industries, and British Tactical.