MOLLE Yucca Pack, modded to a big Lumbar pack!

My small MOLLE Yucca daypack is now doing duty as a beefy lumbar pack on a MOLLE waist belt set up and H harness set up… the main modifications involved were very extensive, basically a whole panel of MOLLE webbing on the back of the pack, plus 4 Ladder-loc buckles at specific locations to function better as a lumbar pack.. With some adjustment on how I attached my MOLLE Sustainment Pouches, I found that it functions better, and gives me some space in the main sack and on the outside… instead of taking up all 12 MOLLE slots on the perimeter for the two Sustainment Pouches, I have spaced it so that each pouch only takes up 5 slots each (for 10 slots), and a gap of 2 MOLLE slots in between for my Nalgene carrier and small misc item pouch. This also provides me with a convenient route for the flap straps..

DSCN2354

The pack. The top stuff sack houses my hammock and bugnet and suspension, while the MOLLE Sustainment pouches each hold the kelty topquilt and the hammock under pad insulation, and the main sack holds my clothing. The nalgene carrier in the lower middle houses an IKEA kitchen caddy turned into a wood burning stove, and the Buschraft Outfitters 10×10 silnylon tarp in Coyote brown.

DSCN2355

View of the waist belt set up; the large pouch holds my food and cook set, while the smaller pouch holds my first aid kit and fire kit, then between the canteen and the pouches are two modified 40mm ammo pouches, one holds my 4.5″ blade knife, the other holds a small 2AA Angle-head flashlight. Obviously there are two water bottles on the belt at the kidney positions.

DSCN2353

Belt opened up, you can see how there’s quite a bit of padding, the belt pad is size Medium, and is basically perfect as a waist belt on this pack system. You can also see the suspension straps for the pack.

DSCN2345

The MOLLE panel for the back, Instead of a normal method of alternating straps, I decided to fill the whole panel with butted straps so that I have basically as many options for attaching it to whatever I want to.

DSCN2352

The upper harness attachment system, what it is, is essentially a load lifter system, the pack’s D-rings are the anchors, while the harness adjuster only serves to locate the top point, and the Ladder-locs on the flap is the main adjusting point.. because I do not have internal stays on the pack, this method is needed to get the pack to ride as close to the back as possible.

DSCN2347

For those wondering how’d I attach the pack to the waistbelt… these are the 4 5″ long MOLLE straps I made up from the scraps I have on hand.

DSCN2356

A pic of the modified 40mm pouch, the only mods needed is the addition of a snap below the original snap to enable me to securely close the flap for better retention of the knife.

ALICE frame modular stuff sack pack system;

Decided to see what the MOLLE compression panels could take, and set up a backpack system in which the main bag is removable and contains all of my hammock camping gear cept tarp and suspension tree straps!

DSCN2311

Pack with everything loaded onto it

DSCN2312

Side view with hatchet mounted

DSCN2313

Other side view with knife and flashlight

DSCN2314

Bottom view, that is a vintage M1967 sleep system carrier being used as the bottom panel.

DSCN2315

Suspension view. Even though this frame is obsolete, and usually not comfortable with ALICE packs…it works pretty good for this load because of the packing system.

The pack contains the following items;

In the WW2 laundry bag stuff sack;

hammock

under pad

bug net

Kelty top quilt

In each of the 4x USMC Coyote brown pouches;

First aid kit (marked with red cross)

cook set and fire kit

food

back up hammock/gear hammock (Grand Trunk UltraLite)

In the MOLLE Water bottle carriers are the water bottles (self explanatory)

USGI M16 pouches carries my tarp in one, and hammock suspension in other

IDF revolver ammo/handcuff pouch houses my compass

Green Buttpack up top carries my clothes for up to 3 days

horizontal MOLLE pouch on very top carries my stakes, cordage, bandannas.

I do have room enough in the WW2 laundry bag to carry more insulation if I need to.

I notice that the MOLLE compression panels will likely need a 3rd buckle in the middle, and 2 more straps to attach to the frame, so that it compresses better around the main stuff sack.

Modded harness and redid Yucca light pack set up!

Modded my black harness to provide two attachment points for my small Yucca pack lower straps, and redid the pack set up!

Harness redone 1

Harness without pack

Yucca Pack and Harness

With pack attached

Yucca pack harness

Back view of harness and pack connected; you can see the two extra Fastex buckles being used to connect pack  lower straps to the harness

Yucca Pack hammock kit 2

Side view of the pack; the side pockets are to hold food and misc items.

Yucca pack harness attachment upper detail

detail shot of upper pack attachment, the harness padding part has a couple of metal snap hooks to attach to D-ring equipments.. the harness upper part is from a black M1967 web harness from Rothco I believe.

Yucca Pack lower harness attachment detail 2

detail of the lower pack strap attachment. Its simply a sewn loop strap, girth-hitched onto the D ring.

Yucca pack to Harness lower attachment detail 1

Another detail shot, showing the strap connecting to the buckle which is attached to the harness permanently.

Yucca pack hatchet mount detail

Detail shot of Army hatchet mount between the MOLLE Sustainment Pouch and the main pack

Yucca Pack redone hammock kit 1

shot of pack without the harness.

Harness Right panel detail

Detail of Right-hand panel of the harness.

Load out is as follows;

In the main pack, I have the following items.

Hammock and kelty top quilt in main compartment with Whoopie Slings attached to hammock

USGI CCF pad under top flap

3-4 days worth of clothes in MOLLE Sustainment Pouch

Hatchet in between Sustainment Pouch and Main pack

foods in 3 side pockets, large foods in the USMC Coyote Brown pockets and small foods in one camo pocket, while the final camp pocket holds the tree straps for the hammock and a bandanna and headlamp

Moving on to the harness;

2x 1qt water bottles in MOLLE canteen covers; one is a Nalgene bottle, the other is a Life-line canteen with an Army canteen cup

handgun with ammo

first aid kit in one black pocket

Long Ogee tarp in second black pocket

hammock bugnet in long green pouch

tarp lines and stakes in shotgun ammo pouch (no shotgun ammo)

compass in compass pouch

Mini Maglite behind black pocket

4.5″ blade knife behind other black pocket

Esbit stove and fire kit in third black pocket

snacks and misc items in fourth black pocket

handgun ammo magazines in USGI mag pockets attached to two black pockets

With this load out, the entire kit should be good for 3-4 days of hiking and traveling in the woodlands…

Pole mod for the Long Ogee Tarp!

Decided to see how tent pole sections work with the Long Ogee tarp over a hammock!

4 sections of ~21″ tent pole with shock cord; tied to tie outs via Paracord

Long Ogee Tent Pole Mod 1

It looks like the ENO DryFly with doors… only 4 stakes!

Long Ogee Tent Pole Mod 2

Sideways view; I used the green tree straps with hooks for the tarp attachment, and did a truckers hitch on one side to get it taut.

Long Ogee Tent Pole Mod 3

how it looks from the inside, with whoopie sling attached to tree strap;

Long Ogee Tent Pole Mod 4

Sorry for little blurry pic, I couldn’t find my mitten hooks or webbing pockets, so I used the paracord sections to tie the pole sections to the tie outs

Long Ogee Tent Pole Mod 5

View of the interior from the hammock.

Long Ogee tarp, 5 alternate set ups!

Decided to do 5 different set ups with this one tarp!

Long Ogee Alt Set up 1A

A-frame with gables; same tarp, turned 90 degrees, and staked at 4 points!

Long Ogee Alt Set up 1B

Another view of the A-frame set up. Could also be used for hammocking!

Long Ogee Alt Set up 1C

Sideways view

Long Ogee Alt Set up 2A

Ground mode; drop one end down to the ground and move two stakes to the center loops; this is roomy and low.

Long Ogee Alt Set up 2B

view of the interior of the ground mode. it kinda looks like a wing or something.

Long Ogee Alt Set up 3A

Different ground mode set up; this time using the long ridge line

Long Ogee Alt Set up 3B

3 stakes on the back plus the two side wing stakes. should be enough room for 2 people plus their gear…

Long Ogee Alt set up 4A

similar set up, with same number of stakes, different locations, plus the poles and their guy lines

Long Ogee Alt Set up 4B

Angled view of the alt set up.

Long Ogee Alt Set up 4C

basically a modified diamond set up; the 2 corner stakes from the previous set up has been moved to the tie outs where the triangles attach to the main panel.

Long Ogee Alt set up 5A

Here is a much smaller, more protected set up. Basically half a Pup tent and half an A-frame tent. The extra material to one side of the two triangles have been folded under after staking down the corners.

Long Ogee Alt Set up 5B

Another view, you can see that the head and foot ends are not totally covered from one side, but they are covered amply by the triangles. I could move the awning up to another set of poles if I wanted to.

Long Ogee Alt Set up 5C

View to the inside of this small set up. In theory, two people could share the space, but realistically its great for one person and his/her gear.

Hope you enjoyed this post! 🙂

Long Ogee Batwing tarp done!

After ordering 6 yards of 58″ wide fabric and 3/4″ crosgrain webbing from [url]www.ripstopbytheroll.com[/url] ; I went and made a longer/larger version of the Ogee Batwing tarp! Took me several hours of cutting, and then sewing the hems and attaching tie outs, but I think the end result is pretty decent! I received 18 feet 8 inches of fabric, so that allowed me a little more latitude for the ridge line length and overall width…

Specs are as follows;

1.1 Oz Khaki Silnylon, 6 yards

16 tie outs of 3/4″ crosgrain webbing, sewn to hems with straight stitches, 4 lines minimum, some tie outs are X-in-box attached (corners and ridgeline tie outs)

overall length, roughly 18 feet 4 inches, width, roughly 11 feet 4 inches

Long Ogee Tarp 1

Set up with poles, I set it up first with one triangle staked down, then the poles, then the final triangle staked down, and then attached guy lines to open up the ends and stake the doors down. In a camping situation, I would start with ridgeline first, and tension it as much as possible, before staking the sides down.

Long Ogee tarp 2

end view

Tieout detail

side tie out detail; it’s stitched right into the hems

Tarp pouch 4.5x4.5x3

Amazingly, the entire tarp all fits into this 4.5″x4.5″x3″ shotgun ammo pouch, also made by me!  No guylines and no stakes, those would travel in a different pouch.

Tarp Shelter layouts and set ups!

Decided to go and do several different tarp shelter designs and layouts with the 5×7 tarp, Bat wing tarp, 9×7 tarp, and the latest 10×14 tarp I recently got!

DSCN2205

Flying Diamond pitch, Harbor Freight 5×7 tarp;

DSCN2206

Windward side view, first, tie upper corner to tree or post, then stake diagonal opposing corner down, then stake remaining two corners to make a wind break

DSCN2207

Another view of the Flying Diamond pitch with the 5×7 tarp, it does not provide much protection from rain, but is good for sun shade and possibly as a fire reflector using a pole to support the high corner.

DSCN2201

Batwing tarp in a symmetric diamond pitch with doors staked out on one side.

DSCN2202

Quarter view on windward side, the doors on the ground corner have been folded under, thus turning this tarp into a rhombus of 9 ft ridge line and 7 ft width.

DSCN2203

Head on windward view, the rhombus shape is all too readily apparent here, I think this is a good one man shelter, maybe two if the two people like cuddling together.

DSCN2204

Detail of doors on the pole side. Since the doors are not exactly vertical from the peak, they will go out past the pole or tree, and I might add tarp tie outs on the junction between the doors and the sides, so as to provide a place to stake out further, or suspend between two poles or trees.

DSCN2208

Another 5×7 tarp set up, Low Tetra pyramid…or “Dead Man’s bivy bag” set up due to its tiny size.

DSCN2209

The height of this is around 30 inches, while the width is 60 inches at the far end, and a floor length of 7 feet. This is NOT an ideal shelter for tall people, but for the average user or shorter, it would be a survivable shelter with protection from most elements.

DSCN2210

Windward view, one could make it feel bigger by adding a tie out/panel pull out where the sticker is on this tarp.

DSCN2215

Half-Pyramid open faced shelter utilizing the tan 9×7 tarp and suspended from a Douglas Fir branch.

DSCN2216

Windward view of the tarp shelter

DSCN2217

Tree side view, that is a 5×7 tarp as the ground cover, and there is plenty of room in there for up to 3 people. Best with two and gear, and with a metal pole or similar, one could have a fire in front of the pyramid shelter and be comfortable.

DSCN2218

Interior view with ground cloth and my MOLLE pack in there.

DSCN2224

10×14 tarp set up in a 6×8 narrow pyramid with approx 7 ft height.

DSCN2225

View of door side with door flaps closed up.

DSCN2226

Interior view showing the basic fold of corners and the space given.

Basically one puts tarp clips 3 feet from the corner of the door flaps, for the front, and then put tarp clips an approximate distance (in this case, 4 feet) from the corners on the back to make a 6 ft width between the back two clips, and thus providing just around 8 ft of length between the front and the back after squaring up the stake points.

DSCN2227

With 9×12 tarp erected using 5 more pole sections as an awning.

DSCN2228

Not quite lined up I know, but this gives good space under which to dine or cook or hang around in weather.

DSCN2229

A different pyramid set up, this oddly enough gives me a bigger floor space than the narrow one above, the doors are now 4 feet wide, and the back edge is now 8 feet wide..there is a 6×8 tarp in there, and according to my calculations and confirmed with this set up, I have a floor of 8 ft wide and 6 feet 6 inches length, thus providing me with more useful room in the shelter. Same 7 ft approximate height.

DSCN2230

Closed up, basically weather proof. I could cut a hole in there for a stovepipe but I do not have a stove with pipe yet.

DSCN2231

Side view of Leaning/half Pyramid set up.

DSCN2232

Windward-quarter view, showing the better pyramid shaping compared to the narrow one.

DSCN2233

All packed up save for the pole. I might splurge for a backpacking tarp pole if it means a smaller package than that shown above. Both the 10×14 tarp and the 6×8 ground tarp are rolled up in the bag, along with the stakes and the single long line.

Hope you enjoyed this post!