Coyote tan 8-cell 995 rig and black Plate carrier rig

Built a Coyote tan 8-cell vertical mag rig for 4 Redball 20rd mags, and 4 10rd Factory 995 mags, and then built a 5 20rd, 5-10 10rd vertical Plate Carrier clip-on rig for two customers!dscf0881

On olive green fabric, showing the tan X harness, tan webbing and mags loaded.


Compared to fishing belt kit with Coyote pouches


Against 330D Multicam fabric

I also modified a customer’s black slick plate carrier to accept the black 8 cell vertical rig, and built a new 10 cell direct-attach rig. I added 4x Fastex buckles to the Plate Carrier, this was the least invasive method for the user, did not need to rip seams to attach buckles


Front of Plate Carrier showing the two upper buckles



Back of plate carrier, showing the top 2 45 degrees buckles for the diagonal webbing


Loaded up and attached to rig on mannequin. Front view.


Back 3/4 view, the user utilizes the standard back strap of the chest rig, and the diagonal webbing from the black 8 cell rig goes up to the two 45 degree buckles. THe 8 cell rig is capable of being used on its own with its H harness, and the carrier can keep the buckles fastened/unused.

I made a 5 cell plate carrier rig next, with no snaps, but velcro attachment, back strap attachment, and a simplified upper strap attachment, for direct attachment to the black plate carrier. I overestimated the size of the dividers needed, and now the 5 front cells can have up to 2 9mm Hi Point mags, OR 1 double stack pistol mag in each cell, and the back 5 cells are generously sized for the Redball magazines. With this cleaner panel layout and the size, it does not extend past the edges of the plate carrier.


Clipped directly and attached to the plate carrier


Back view of rig, showing the velcro strip for attaching to plate carrier and reversed buckles up top, adjusts from the inside, so as to hide the straps for a clean appearance


Front 4 cell panel showing velcro flaps and velcro attachment. It looks like I was off on the bottom stitching, but that is a result of not loading the cells with weight, it is even when loaded.

The material used is 500D Cordura in both black and coyote tan.