ALICE frame modular stuff sack pack system;

Decided to see what the MOLLE compression panels could take, and set up a backpack system in which the main bag is removable and contains all of my hammock camping gear cept tarp and suspension tree straps!

DSCN2311

Pack with everything loaded onto it

DSCN2312

Side view with hatchet mounted

DSCN2313

Other side view with knife and flashlight

DSCN2314

Bottom view, that is a vintage M1967 sleep system carrier being used as the bottom panel.

DSCN2315

Suspension view. Even though this frame is obsolete, and usually not comfortable with ALICE packs…it works pretty good for this load because of the packing system.

The pack contains the following items;

In the WW2 laundry bag stuff sack;

hammock

under pad

bug net

Kelty top quilt

In each of the 4x USMC Coyote brown pouches;

First aid kit (marked with red cross)

cook set and fire kit

food

back up hammock/gear hammock (Grand Trunk UltraLite)

In the MOLLE Water bottle carriers are the water bottles (self explanatory)

USGI M16 pouches carries my tarp in one, and hammock suspension in other

IDF revolver ammo/handcuff pouch houses my compass

Green Buttpack up top carries my clothes for up to 3 days

horizontal MOLLE pouch on very top carries my stakes, cordage, bandannas.

I do have room enough in the WW2 laundry bag to carry more insulation if I need to.

I notice that the MOLLE compression panels will likely need a 3rd buckle in the middle, and 2 more straps to attach to the frame, so that it compresses better around the main stuff sack.

Advertisements

Vintage Bicycles and Sisters, OR overnighter!

Picked up these two bicycles; a 1973 Schwinn Suburban ladies bike and a 70s Murray 3 speed bicycle, and went on an overnighter in Sisters, Oregon with the Other πŸ™‚

First up; pics of the Sisters trip; I had forgotten to pack her hammock, so with the extra blankets and such I have, we made a ground sleeping system and the ground isnt hard due to a layer of forest duff; I asked her which she wanted to use, she immediately said the ground with the USGI bivy bag.

DSCN2000

view of area, facing the morning sun

DSCN2001the camp site; no rain that night, and super clear night..so bright I had to use a hunting/concealment poncho as a light break to sleep better. Hammock under pad works great in lows of 60s…

DSCN2002old burnt tree, with a new tree next to it

DSCN2003another view of a different part of Deschutes National Forest.

 

And here’s the 1973 Schwinn Suburban ladies bike; 5 speed GT100 rear derailleur, Schwinn rack which used to be a baby carrier, I removed the seat back and foot peg

DSCN2004view of the bike

DSCN2010other side of bike

DSCN2005Original schwinn rack

DSCN2006Schwinn Chicago headbadge

DSCN2011Original Schwinn Approved seat

DSCN2009Schwinn Approved Shimano GT100 rear derailleur

DSCN2008Dat funky cloverleaf chain ring

DSCN2007Schwinn Approved grips; original to the bike; not commonly found on these things presumably due to being hard or uncomfortable

DSCN2012Weinmann Brakes and cut down front fender

It originally had a WALD 535 twin basket rack, which I put onto the Murray Monterey 3 speed bike for my own use πŸ™‚

DSCN1976Murray without rack; handlebar is the only badly rusted part on the whole bike, bought it at a church rummage sale for $5!

DSCN1975Other side of rack-less Murray

DSCN2013With the WALD 535 Twin Basket rack mounted; the rack used to be mounted to the Ladies Schwinn via an U bolt, I went to Home Depot and found another U bolt with the right size base plate, and used that base plate to mount the rack to the seat stays.

DSCN2015other side, view of the large rack; I can put my laptop bag in there, with room to spare!

DSCN2014Detail of rack mount

DSCN2016Shimano 333 internal gear hub thumb shifter

DSCN1979Shimano 333 hub with shift cable mount system

DSCN1980Murray head badge metallic decal

DSCN1978

Murray metallic decal denoting 3 speed

DSCN1977Monterey script, I think it is actually painted, or it could be printed…not sure….no real sign of decal edges.

Well there you have it! I got a new rim tape to the front tire of the Murray, and the tubes aren’t leaking at the moment, though I have spare tubes just in case…. so far, I have only $5.98 total put intoΒ  BOTH bicycles….. The Schwinn ladies was given to me for free from a family friend..it was grungy and dirty….the Murray was also grungy and dirty, with flat tires and torn rim tape on the front wheel….I spent around 4 hours or so just cleaning the rust off best I can and washing and waxing the frames….and lubing, oiling what needs oiling, adjusting what needed adjusting and airing them up….they both ride pretty good.

Hammock Shelter/Bivy and tarp group shelters, Vintage hiking pack

 

SO I scored a vintage Academy Broadway Jasper hiking pack from a thrift store for cheap, and modified the straps and belt to better fit me…. It is pretty useful, and very roomy..more room than the ALICE Medium packs I own. I loaded it up and put on my MSS bag with the ECW Intermediate bag and Hammock Underquilt on the bottom, there is still room in main compartment for food and such, small pockets hold fire starting kit and folding stove, along with straps and cordage. Pictures are of the pack with the Coleman PEAK 1 and the ALICE medium for comparison. DSCN1724 DSCN1725 DSCN1726 DSCN1727 DSCN1728 DSCN1731 DSCN1732 DSCN1733 DSCN1734

 

Below is my group shelter, with a 12×9 tarp as main panel, and 3 9×7 tarps as floor and side panels, it is roomy and can accommodate up to 6 people, probably more comfortable for 4. ideally, it would be split into 4 packs for 4 people, so as not to overburden one person with all 4 tarps. DSCN1748 DSCN1749And here is the 12×9 tarp as a hammock shelter; pitched A frame with porch, and with a 9×7 tarp on ground (folded lengthwise) as ground sheet.

DSCN1723And here is another shelter, a duck hunter camo bivy, at first I didn’t know how it was really supposed to set up, until I set it up the way that it was originally set up and noticed that one edge was supposed to be sewn to another edge, so I added a 70″ zipper to that edge to enable it to become a hammock shelter as well as a bivy shelter. it is 8 ft long on the top portion, just shy of 6 feet on the width of the top, and 6 ft long on the bottom, and same width as the top. Below are the first set up pictures, you can see the open edge and the 3 corner grommets that puzzled me until I added the zipper to it.

DSCN1750 DSCN1751 DSCN1752 DSCN1753Sewn zipper to the open edge, and set it up, turns out the grommets on the corners were so that it could become doors, and thus the lines existence became clearly for tying them into doors.

DSCN1757 DSCN1758and I set it up as a hammock shelter, which is the reason for the zipper to be where it is, and it is very much a minimal coverage shelter on the ends, I may add two triangle pieces of Coyote Brown material to the ends, so that I can have more overhead coverage.

DSCN1759 DSCN1760 DSCN1761I haven’t spent a night in the hammock yet, and I will be doing some adjustment to the ridge lines of both the shelter and the hammock structural ridge line.

Hope you guys enjoyed this post! πŸ™‚