Chest rigs for Redball 995 mags

Made a couple chest rigs in black 1000D vinyl backed Cordura for the new Redball Magazines for the Hi Point 995/995TS 9mm carbines; First one is a horizontal carrier, with utility pouches that fit 100rd organizer boxes, or other small stuff. The other one is a vertical 8-cell carrier that accommodates 4x 20rd Redball magazines and 4x 10rd factory magazines.

They are based on traditional chest rig designs from China and South Africa, but tailored for the particular magazines.

DSCF0873

Horizontal 4-magazine chest rig with utility pockets on ends, single layer construction and layout is based on a SADF chest rig but with horizontal magazine pockets as opposed to vertical;

DSCF0871

Unloaded, You can see how the magazine shape is unique and does not lend itself to other magazine pouch designs or normal retention methods

DSCF0869

Close up of magazine retention system; hidden snaps and doubled over 1.5″ webbing. I got the idea after looking at one of my knife sheaths and figured that since the ends and mid plates are larger than the magazine body, it would be useful to have a similar retention method, and so far it has worked beautifully.

DSCF0868

Straps snapped in place. I did this set up to make it easy to open and draw with the left hand.

DSCF0874

Detailshot of the utility pocket. They are shallower than the usual SKS/Shotgun ammo pockets I have made, but fits a 100rd 9mm organizer box with some room to spare for tools or keys or other things. Can be used to carry first aid kit as well.

DSCF0875

With my MOLLE MIcro chest rig for pistol magazines and the prototype bandolier made of 420D pack cloth scraps. Yes that is my 995 Classic carbine with Primary Arms 1-4x scope on it.

DSCF0877

My other chest rig, vertical 8 cell magazine carrier, next to the Horizontal one. It is based on a combination of Chi-Com and R.A.C.K. chest rig designs (R.A.C.K. rectangle panel, Chi-Com one piece magazine/clip pocket panel) with two different fastening systems; a simple wrap around retention strap for the 4 Redball magazines, and a narrow flap strap for the 4 factory 10rd magazines. I only own 1 factory 10 round magazine at the moment.

DSCF0878

Close up of the short pouch showing the factory 10 rd magazine. I can also put in a Leatherman multi-tool in the same size pocket. bonus!)

DSCF0879

Detailclose up of the chest rig panel with the Redball magazines fastened in. The flag patches on both of them are from Universal Shooting Sports Forum , wherein I am a member.

DSCF0880

Unloaded except for the one 10 rd magazine. It is a simple rig. I will be making about 6 of these rigs in Coyote Brown with either tan binding tape and webbing or dark brown binding tape and webbing.

Advertisements

Long Ogee Batwing tarp done!

After ordering 6 yards of 58″ wide fabric and 3/4″ crosgrain webbing from [url]www.ripstopbytheroll.com[/url] ; I went and made a longer/larger version of the Ogee Batwing tarp! Took me several hours of cutting, and then sewing the hems and attaching tie outs, but I think the end result is pretty decent! I received 18 feet 8 inches of fabric, so that allowed me a little more latitude for the ridge line length and overall width…

Specs are as follows;

1.1 Oz Khaki Silnylon, 6 yards

16 tie outs of 3/4″ crosgrain webbing, sewn to hems with straight stitches, 4 lines minimum, some tie outs are X-in-box attached (corners and ridgeline tie outs)

overall length, roughly 18 feet 4 inches, width, roughly 11 feet 4 inches

Long Ogee Tarp 1

Set up with poles, I set it up first with one triangle staked down, then the poles, then the final triangle staked down, and then attached guy lines to open up the ends and stake the doors down. In a camping situation, I would start with ridgeline first, and tension it as much as possible, before staking the sides down.

Long Ogee tarp 2

end view

Tieout detail

side tie out detail; it’s stitched right into the hems

Tarp pouch 4.5x4.5x3

Amazingly, the entire tarp all fits into this 4.5″x4.5″x3″ shotgun ammo pouch, also made by me!  No guylines and no stakes, those would travel in a different pouch.

MYOG MOLLE Yucca Pack!

Made a MOLLE version of the Boy Scouts Yucca/ Green Bar Bill Pack; using 1000D DCU Cordura scraps….. Since I wanted a day pack that was in between the size of a Recon Buttpack and the size of a normal Schoolbag or the Medium Ruck sack…plus the ability to add or subtract pouches to it….I looked into my sewing fabrics drawer and out came the DCU Cordura material…I did not have enough width to make the pack the way  I make my pouches, but I had enough material to make a pack a little differently; with two side panels sewn to the main panel.

DSCN2170

Bare pack; with straps undone..yes the flap is ridiculously long, but its for a reason

DSCN2176

Flap opened up to show full height of the panel; 6 rows and 6 slots of MOLLE

DSCN2171

Side of pack; with 6 rows and 3 slots of MOLLE; for attachment of whatever you could want. Could thread cord through some slots and use that to compress the sides if needed?

DSCN2172Bottom of pack with 3 rows and 4 slots of MOLLE, for attachment of either MOLLE Waistpack or lashing straps for gear

DSCN2173

Back of pack without shoulder straps attached. The D-rings are for shoulder straps obviously, but they could also be used to strap to a frame or a larger ruck sack if one wanted to.

DSCN2175

Top of pack, showing the “ear flaps” to keep most weather out. I might add snaps to the edges to seal better…

DSCN2174Its like a cave of T-shirts! there’s enough space for up to 3 or 4 days of clothing in there….provided you put the rest of your camp gear outside it…as these next two pics will show!

DSCN2178

All packed up for a summertime/warm weather camp trip! Green sack has my modified Kelty topquilt, and then there’s the freebie Coleman inflatable pad on the bottom…the two squarish pouches holds food, first aid kit, and small batwing tarp. The long horizontal pouch holds tarp stakes, guylines, compass, misc gear.

I have two canteen pouches on this as well;

DSCN2177

The back showing the canteen pouches in use with canteens and cup and canteen stove; and their small pockets hold my Swiss Army Knife, and fire kit. You can see that I am using USGI LC-2 straps for backpacking duty, I could clip the pack to the black webbing harness I have which have two hooks for small packs such as this.

Hope you enjoyed this post!

 

UPDATE on this post! I have more pictures and detail shots of the pack!

DSCN2179

With pad and stuff sack removed, and black shotgun pouch added and small knife attached to MOLLE KA-BAR adapter. It is shown next to the small Recon Buttpack

DSCN2180

Better shot of the side and showing how much the three coyote pockets add to the depth of the pack

DSCN2181

detail shot of attachment of shotgun ammo belt pouch via ALICE to MOLLE adapter

DSCN2182

With green stuff sack up top

DSCN2183

Comparo shot of complete overnight-3 day pack next to large MYOG hiking backpack

Redid my hammock shelter into a minimalist tarp!

SO like the previous post said, my attempt failed at an integrated hammock shelter/bug shelter/ under cover…….

so I took it all apart, and did a few sketches and made a plan; Bat-Wing Tarp designIts based off of Hammock Forums’ member Gargoyle’s Ogee Tarp; and built using just the 55″x144″ material I have on hand;

it is now a very light, compact tarp, I will need to redo my hammock suspension so that I can put the tarp closer to the body of the hammock..

Bat-Wing Tarp Design 1the tarp over my hammock, it looks like a bat wing doesn’t it!?Bat-Wing Tarp Design 2angled view of the tarp

Bat-Wing Tarp Design 3head on view of the tarp, yes it is narrow, and that is the door/beak corner system

Bat-Wing Tarp Design 4 Close Upclose up of the triangle parts, I have an extra tie out there in case I want to do a tent pole spreader mod so that it opens up more on the inside.

Bat-Wing Tarp and Hammock  belt kitthe whole system; I now need to figure out the stakes/guy line situation as to how to pack them without getting the hammock dirty..,might use an USGI M16 cleaning kit pouch? the pouch on the far right holds my tarp, yes that is right, it packs down ridiculously small! the SAW ammo pouch holds the hammock, and the other small pouch holds the suspension parts, these two small pouches were my prototypes for the SKS ammo clip pouches.