Gear for sale; rigs and pouches

I have some self-made gear for sale; the 995 Plate Carrier rig, and a new leg pouch for 2x Redball magazines, and a black split 6-mag AR chest rig with zippered pockets;

I do take Paypal; email me for information!

20170716_194908

Redball plate carrier; 4x 20rd mags shown; fits plates up to 9x12x1. Asking $75 without magazines.

20170526_170231

AR Chest rig; 6 AR mags, zippered compartments, 1000D Cordura. Asking $90, mags not included

20170526_170243

top view of rig

20170526_170257

Back of rig

20170526_170449

bottom of rig

 

20170526_172234

shown with self-made DCU rig and Tactical Tailor OD MAV

20170722_164218

Leg pouch for 2x Redball magazines plus single MOLLE column for pistol pouch or multitool pouch

20170722_164228

MALICE style backing for MOLLE belts, and tunnel for standard belts up to 3″ wide.

20170722_164239

belt pass-through tunnel

20170722_164346

With two Redball mags and a Riggers belt threaded through

20170722_164426

With MOLLE M9 pistol pouch attached.

I am asking $25 for this leg rig pouch; without belt and without MOLLE pouch. also does not come with the magazines.

Email me for more details, I am willing to custom make gear for a price! Chest rigs anywhere from $75 to $125 depending on features, pouches from $20 to 40, depending on size, capacity, and magazine type! I do not make SKS 10rd clip pouches anymore, as the surplus Continue reading

Redball Magazine plate carrier and pouches

I Modified my black horizontal Redball 20rd magazine chest rig into a basic plate carrier complete with back plate bag; and then I decided to build a couple pouches, first pouch was an attempt at doing a vertical, side by side pouch with bungee cord retention, hated it.. so made a 2nd pouch that is much more conventional; holds 4 20rd magazines in a boxy pouch that is kinked on the sides, and has a center divider, and two 3/4 coverage flaps over each pair of magazine.

17500400_10212676767098725_40685970_o

Front of 4-mag plate carrier

17522021_10212660375568947_1492802446_o

Back of the front carrier

17571301_10212676767018723_1584227163_o

inside of both carriers

17571382_10212660375768952_147266955_o

Side view of front carrier

17571922_10212676767138726_1689016066_o

View of outside of both carriers; the rear carrier has MOLLE strips for attachment of hydration pouch or small gear; or even butt pack on bottom row.

The plate carrier will fit up to 9×12 plates on both front and back. It is basically a simple armor carrier with magazine pockets sewn to the front , and utility/first aid pockets sewn on the sides.

17622557_10212695341283068_589020450_o

My first attempt at a MOLLE 995 20rd pouch for the 20 rd Redball magazines; the idea was to have elastic retention and not a lot of fabric, but it is a failure here, due to the extreme splay and sticking far out away from the platform it attaches to.

17692844_10212695341683078_1823718218_o

Side view of pouch showing the kink and how far away it sticks out

17623062_10212695525247667_417350286_o

good view of how far it sticks out from a MOLLE belt; due to being bottom heavy and not having a lot of retention up top other than the elastic cordage

17571744_10212695525287668_871548173_o

Mounted to the MOLLE belt I have, it is not really good here.

17692700_10212695341563075_1533369089_o

Back view of the pouch showing Tactical Tailor styled MOLLE webbing for use with TT  Short MALICE clips.

17670768_10212711122917599_1884595210_o

pattern blank cut up, then hemmed with edge tape for 2nd MOLLE pouch in Coyote Brown

17670607_10212711842335584_829307077_o

All done except some details; 1″ ITW buckles in Tan-499 color, khaki webbing straps

17693173_10212712153463362_800367116_o

Mounted to the MOLLE belt

17622289_10212712154623391_1155258031_o

Finished 3/4 coverage flaps on the top using 1.5″ webbing.

17758965_10212712154463387_751759966_o

Another view of the top half; mounted by the same MALICE clips and same style webbing on the back of the pouch, as the pouch retains the magazines better; the whole thing is far stabler and easier to use.

17758970_10212712153343359_55155911_o

Side view showing the kink in the side panels to accommodate the Redball magazine shape

 

 

 

Coyote tan 8-cell 995 rig and black Plate carrier rig

Built a Coyote tan 8-cell vertical mag rig for 4 Redball 20rd mags, and 4 10rd Factory 995 mags, and then built a 5 20rd, 5-10 10rd vertical Plate Carrier clip-on rig for two customers!dscf0881

On olive green fabric, showing the tan X harness, tan webbing and mags loaded.

dscf0882

Compared to fishing belt kit with Coyote pouches

dscf0884

Against 330D Multicam fabric

I also modified a customer’s black slick plate carrier to accept the black 8 cell vertical rig, and built a new 10 cell direct-attach rig. I added 4x Fastex buckles to the Plate Carrier, this was the least invasive method for the user, did not need to rip seams to attach buckles

20160714_162007

Front of Plate Carrier showing the two upper buckles

 

20160714_161938

Back of plate carrier, showing the top 2 45 degrees buckles for the diagonal webbing

20160714_162830

Loaded up and attached to rig on mannequin. Front view.

20160714_162850

Back 3/4 view, the user utilizes the standard back strap of the chest rig, and the diagonal webbing from the black 8 cell rig goes up to the two 45 degree buckles. THe 8 cell rig is capable of being used on its own with its H harness, and the carrier can keep the buckles fastened/unused.

I made a 5 cell plate carrier rig next, with no snaps, but velcro attachment, back strap attachment, and a simplified upper strap attachment, for direct attachment to the black plate carrier. I overestimated the size of the dividers needed, and now the 5 front cells can have up to 2 9mm Hi Point mags, OR 1 double stack pistol mag in each cell, and the back 5 cells are generously sized for the Redball magazines. With this cleaner panel layout and the size, it does not extend past the edges of the plate carrier.

20160904_173621

Clipped directly and attached to the plate carrier

20160904_173639

Back view of rig, showing the velcro strip for attaching to plate carrier and reversed buckles up top, adjusts from the inside, so as to hide the straps for a clean appearance

20160904_173656

Front 4 cell panel showing velcro flaps and velcro attachment. It looks like I was off on the bottom stitching, but that is a result of not loading the cells with weight, it is even when loaded.

The material used is 500D Cordura in both black and coyote tan.

Chest rigs for Redball 995 mags

Made a couple chest rigs in black 1000D vinyl backed Cordura for the new Redball Magazines for the Hi Point 995/995TS 9mm carbines; First one is a horizontal carrier, with utility pouches that fit 100rd organizer boxes, or other small stuff. The other one is a vertical 8-cell carrier that accommodates 4x 20rd Redball magazines and 4x 10rd factory magazines.

They are based on traditional chest rig designs from China and South Africa, but tailored for the particular magazines.

DSCF0873

Horizontal 4-magazine chest rig with utility pockets on ends, single layer construction and layout is based on a SADF chest rig but with horizontal magazine pockets as opposed to vertical;

DSCF0871

Unloaded, You can see how the magazine shape is unique and does not lend itself to other magazine pouch designs or normal retention methods

DSCF0869

Close up of magazine retention system; hidden snaps and doubled over 1.5″ webbing. I got the idea after looking at one of my knife sheaths and figured that since the ends and mid plates are larger than the magazine body, it would be useful to have a similar retention method, and so far it has worked beautifully.

DSCF0868

Straps snapped in place. I did this set up to make it easy to open and draw with the left hand.

DSCF0874

Detailshot of the utility pocket. They are shallower than the usual SKS/Shotgun ammo pockets I have made, but fits a 100rd 9mm organizer box with some room to spare for tools or keys or other things. Can be used to carry first aid kit as well.

DSCF0875

With my MOLLE MIcro chest rig for pistol magazines and the prototype bandolier made of 420D pack cloth scraps. Yes that is my 995 Classic carbine with Primary Arms 1-4x scope on it.

DSCF0877

My other chest rig, vertical 8 cell magazine carrier, next to the Horizontal one. It is based on a combination of Chi-Com and R.A.C.K. chest rig designs (R.A.C.K. rectangle panel, Chi-Com one piece magazine/clip pocket panel) with two different fastening systems; a simple wrap around retention strap for the 4 Redball magazines, and a narrow flap strap for the 4 factory 10rd magazines. I only own 1 factory 10 round magazine at the moment.

DSCF0878

Close up of the short pouch showing the factory 10 rd magazine. I can also put in a Leatherman multi-tool in the same size pocket. bonus!)

DSCF0879

Detailclose up of the chest rig panel with the Redball magazines fastened in. The flag patches on both of them are from Universal Shooting Sports Forum , wherein I am a member.

DSCF0880

Unloaded except for the one 10 rd magazine. It is a simple rig. I will be making about 6 of these rigs in Coyote Brown with either tan binding tape and webbing or dark brown binding tape and webbing.