Overnight Patrol setup with green lumbar pack

Using my modified MOLLE I belt system and the green lumbar pack I sewn up, I have made an overnight patrol, to 3 day patrol setup.

Pouches;

2x CMVS Triple ammo pouches

2x Canteen covers

2x Tactical Tailor Large Utility Pouches

2x Tactical Tailor Medium Utility/Canteen pouches

Lumbar Pack

Knife sheath on belt portion

DSCF1601

Pack setup 1

DSCF1602

Pack set up 2

DSCF1603

External pockets emptied except for AR-15 carbine (would be on my person)

DSCF1604

Ammo, goes in CMVS Triple mag, water in canteen , metal cup both goes into canteen cover, food goes into Large Utility Pouch

DSCF1605

other water bottle into other canteen cover, 10×10 Bushcraft USA tarp and bunch of paracord goes into other Large Utility Pouch. Medical kit goes into insert, whatever does not fit goes into the bottom of Medium utility pouch, then the plastic insert box goes on top.  stakes, and fire starting kit with Esbit folding multifuel stove goes into other Medium utility pouch, some stakes would do double duty as canteen cup holder on the Esbit stove.

DSCF1606

Hirsch-Weiss (White Stag) Goose Down mummy sleeping bag out of main bag, with clothes.

DSCF1607

Left to Right; Poly-merino wool long john underpants, nylon long sleeve camo shirt, woodland BDU pants, wool socks, and extra underwear. The wool socks and the long johns are for when it gets colder, and I sleep in base layer in the sleeping bag, the other clothes are change for next day or two days on. Fleece pull over or COld Weather Parka with liner would be worn if colder weather, if not, then lash fleece pull over onto the bag, if dry weather is expected..if wet weather, parka or M65 jacket with fleece inside.

Basically this is an overnight system, and up to 3 days, if I pack extra socks and underwear as well.

Advertisements

OD lumbar pack for MOLLE I waistbelt and V strap adapters

Built a large lumbar pack for the 1st generation MOLLE (MOLLE I) ruck waistbelt; as the belt is quite sturdy and has attachments which allows the user to attach an ALICE buttpack to it. Materials; 1000D Cordura Nylon in Tactical Tailor Olive Green; 1″ Nylon webbing in OD #7, ITW-Nexus hardware. Approximately 740 cubic inches, a little over 12 liters.

DSCF1436

The large MOLLE Lumbar pack on the 1st gen MOLLE belt

DSCF1438

Side view

DSCF1437

Upper view

DSCF1449

Shown with 1980s ALICE OD butt pack, and 1990s-2000s ALICE/MOLLE butt pack (really is ALICE but were issued with the 1st gen MOLLE items)

DSCF1443

Close up of the top 1.5″ triglide mounts to stabilize the lumbar pack to the 1.5″ webbing

I also made a set of V strap adapters to interface with Tactical Tailor’s padded MAV harness; and to enable users to attach to the 1st gen MOLLE waist belts, of both types

DSCF1439

Shown attached to the MOLLE I Ruck waist belt; You can see how the waist belt has the hardware for the ALICE butt pack, with metal loops for the woodland butt pack’s lashing straps.

DSCF1448

On a standard 3 piece MOLLE I utility belt; they are commonly found either missing the 1.5″ vertical webbing, or with a different belt attached (either SPEAR ELCS or MOLLE II). The outboard sleeves are nearly identical to the SPEAR ELCS H harness pieces, only they have 3 metal rectangle loops to connect the 1st generation vest panels.

DSCF1440

Close up of the adapter. I used ITW-Nexus’ Strap dividers for 1.5″ webbing, 1.5″ webbing tapered to points, and sewn to 1″ webbing.

DSCF1441

Close up of the lower ends of the V straps, using 1″ Tri-glides and utilizing 3 of the waist belt’s metal loops (There are a total of 12; 6 per side, for adjusting where the vest panels go)

DSCF1444

Pouch/pack attached, 2x Combat Medic Vest system triple ammo pouches, 2x canteen covers, 2x Tactical Tailor Large utility pouches, 1x Tactical Tailor Zippered medic pouch, and the lumbar pack.

DSCF1445

Showing the gap between the pouches for the 1″ webbing to go through.

DSCF1446

Upper view with belt standing up

DSCF1447

On Utility belt; with all 3 sections adjusted smallest possible; from outboard to center; 2x Grenade pouches, 2x CMVS triple ammo pouches, 2x Canteen pouches, 1x SAW 100rd pouch with old  ALCIE?M1967 Jungle First Aid Kit’s plastic box insert.  This set up is very similar to the ELCS H Harness, or Eagle DFLCS H harness, or any of the older PLCE/H-Harness rigs offered by Eagle, London Bridge Trading Company, Blackhawk! Industries, and British Tactical.

Location scouting and Hammock Underpad design!

Went on a location scouting trip yesterday, and I would’ve stayed the night, if I had brought bug spray and bug netting……oh well. Moose Creek is the location, it is off the same road I went for a day trip a while back, but closer to the main highway and on the creek itself….

DSCN1983The walk in site, which have trees at good distances apart for hammocking, were I to camp with a group,  I would mount the hammock one end on the tree further back, so as not to have the tarp lines too close to the fire.

DSCN1990short walk in trail from the dirt road parking; behind that campsite, is a trail down to the creek;

DSCN1982a view looking out from the campsite;

DSCN1984Looking NW from the dirt road, the main road, Moose Creek Road (or as Google Maps says, Moose Mountain Road) is behind the berm, you can see one campfire ring in the picture;

DSCN1985view looking East; there are three more campfire rings in the area; two far back, and one to the left (North)

DSCN1986one of the campfire rings; the ground is rocky here though, but this is a good place for vehicles, air mattresses, or cots…

DSCN1987The sign at the South West end of the area; next to where dirt road stops at a gate; which means the area South of this and to the East, is not open to unauthorized vehicles ,I am not sure of hikers though.

DSCN1988A Notice posted by Sweet Home Rangers; detailing that some sites in the area may become day use areas or closed to camping due to trash and dumping of things…I did not find such evidence, perhaps it had been cleaned up before.

DSCN1981Made myself a nice little twig fire with esbit as a starter…..one thing I dislike about esbit is that it leaves a film of gross stuff on the canteen cup….

DSCN1991Moose Creek from the bridge, the campsite I scouted, is to the left, East of the creek, while there are other campsites to the West of the creek, and several more up the road leading North east up into the mountain..

And I decided I wanted to test this hammock under pad I made from a Wal MArt mattress topper; unlike blue Closed Cell foam, Open cell insulates best when not compressed; so hanging it like an under quilt helps a lot…..

Under Pad first testFirst test set up,

Under Pad endThe ends are not against the hammock, so I needed to cut it so that it conforms to the hammock

Under Pad revised 1Ah revised; these triangles are where I cut the material of the foam, so as to make a shape; Also, I cut the pad down to 48 inches long, and it is 50 inches wide, being a Full size width.

Under Pad Revised 2MUCH better; no load in the hammock….I laid in it and it is warmer….some drafts though, but I will be adding the poncho as an under cover, until I can get silnylon for the under cover;

Under Pad suspension triangleDetail of the suspension triangles for mounting hammock under pad and under quilts; I will be revising them to include plastic toggles so I can just loop the under pad suspension to the triangles instead of tying knots.