Coyote tan 8-cell 995 rig and black Plate carrier rig

Built a Coyote tan 8-cell vertical mag rig for 4 Redball 20rd mags, and 4 10rd Factory 995 mags, and then built a 5 20rd, 5-10 10rd vertical Plate Carrier clip-on rig for two customers!dscf0881

On olive green fabric, showing the tan X harness, tan webbing and mags loaded.

dscf0882

Compared to fishing belt kit with Coyote pouches

dscf0884

Against 330D Multicam fabric

I also modified a customer’s black slick plate carrier to accept the black 8 cell vertical rig, and built a new 10 cell direct-attach rig. I added 4x Fastex buckles to the Plate Carrier, this was the least invasive method for the user, did not need to rip seams to attach buckles

20160714_162007

Front of Plate Carrier showing the two upper buckles

 

20160714_161938

Back of plate carrier, showing the top 2 45 degrees buckles for the diagonal webbing

20160714_162830

Loaded up and attached to rig on mannequin. Front view.

20160714_162850

Back 3/4 view, the user utilizes the standard back strap of the chest rig, and the diagonal webbing from the black 8 cell rig goes up to the two 45 degree buckles. THe 8 cell rig is capable of being used on its own with its H harness, and the carrier can keep the buckles fastened/unused.

I made a 5 cell plate carrier rig next, with no snaps, but velcro attachment, back strap attachment, and a simplified upper strap attachment, for direct attachment to the black plate carrier. I overestimated the size of the dividers needed, and now the 5 front cells can have up to 2 9mm Hi Point mags, OR 1 double stack pistol mag in each cell, and the back 5 cells are generously sized for the Redball magazines. With this cleaner panel layout and the size, it does not extend past the edges of the plate carrier.

20160904_173621

Clipped directly and attached to the plate carrier

20160904_173639

Back view of rig, showing the velcro strip for attaching to plate carrier and reversed buckles up top, adjusts from the inside, so as to hide the straps for a clean appearance

20160904_173656

Front 4 cell panel showing velcro flaps and velcro attachment. It looks like I was off on the bottom stitching, but that is a result of not loading the cells with weight, it is even when loaded.

The material used is 500D Cordura in both black and coyote tan.

Advertisements