Pencott Snowdrift 500D Chest rig for SR25/AR10 users

Made a prototype Chest rig in Pencott Snowdrift 500D Cordura fabric, with white buckles and light cream webbing. The design holds 6x SR25/AR10 20rd magazines, of the metal type, and should also fit Magpul .308 magazines. It has bungee cord secondary retention underneath the main flaps, and MOLLE panels on the sides for the attachment of MOLLE pouches, as available from Helikon and Gear Dynamics. Shoulder straps are padded, and with MOLLE webbing and D rings for attachment of things, standard X layout. There is a 9″ zipper on the back for flat items

DSCF1772

View of whole rig

DSCF1770

With flaps open, showing the bungee cord secondary retention and cord lock

DSCF1771

Back of the rig

DSCF1775

Showing the zippered section

DSCF1773DSCF1774

Details of the MOLLE side panels

DSCF1776

Detail of the bottom of magazine pockets

DSCF1777

Detail of the buckle flaps retention straps at the longest, should fit 25rd Magpul magazines

DSCF1778

Showing the straps X cross over on the back

DSCF1780

With 3 canteen covers, clockwise from left, USMC Coyote brown, well worn 3 color Desert, and Eagle Industries Khaki, for contrast and comparison of the existing gear against the Pencott Snowdrift pattern.

Alas, I no longer have the rig in my possession, as it has been stolen along with a bunch of my other gear out of my car >:[ I can however make another one, with lighter colored thread or white thread, so as to keep this one unique for those who may have seen it around Oregon.

Advertisements

2nd Hi Point chest holster done up!

Sewn up a 2nd Hi Point .45 chest holster in Mossy Oak new Break up 500D Nylon fabric, for a customer!

Differences from the prototype are the following;

Lefthand draw

Reshaped main body

relocated magazine pocket to spine and added drain grommet

Adjustable thumb break strap

added an adjustable belt strap for further stabilization

DSCF1794

Overall view with Hi point pistol and magazine in

DSCF1795

Backside of the holster

DSCF1797

Top of the holster

DSCF1798

Empty holster;

DSCF1796

Detail of adjustable thumb break strap, showing the Line 24 snap

DSCF1799

Close up of the drain grommet

DSCF1800

Mirror self shot, showing how the holster lays

Overnight Patrol setup with green lumbar pack

Using my modified MOLLE I belt system and the green lumbar pack I sewn up, I have made an overnight patrol, to 3 day patrol setup.

Pouches;

2x CMVS Triple ammo pouches

2x Canteen covers

2x Tactical Tailor Large Utility Pouches

2x Tactical Tailor Medium Utility/Canteen pouches

Lumbar Pack

Knife sheath on belt portion

DSCF1601

Pack setup 1

DSCF1602

Pack set up 2

DSCF1603

External pockets emptied except for AR-15 carbine (would be on my person)

DSCF1604

Ammo, goes in CMVS Triple mag, water in canteen , metal cup both goes into canteen cover, food goes into Large Utility Pouch

DSCF1605

other water bottle into other canteen cover, 10×10 Bushcraft USA tarp and bunch of paracord goes into other Large Utility Pouch. Medical kit goes into insert, whatever does not fit goes into the bottom of Medium utility pouch, then the plastic insert box goes on top.  stakes, and fire starting kit with Esbit folding multifuel stove goes into other Medium utility pouch, some stakes would do double duty as canteen cup holder on the Esbit stove.

DSCF1606

Hirsch-Weiss (White Stag) Goose Down mummy sleeping bag out of main bag, with clothes.

DSCF1607

Left to Right; Poly-merino wool long john underpants, nylon long sleeve camo shirt, woodland BDU pants, wool socks, and extra underwear. The wool socks and the long johns are for when it gets colder, and I sleep in base layer in the sleeping bag, the other clothes are change for next day or two days on. Fleece pull over or COld Weather Parka with liner would be worn if colder weather, if not, then lash fleece pull over onto the bag, if dry weather is expected..if wet weather, parka or M65 jacket with fleece inside.

Basically this is an overnight system, and up to 3 days, if I pack extra socks and underwear as well.

Mossy Oak 995 leg rig

Sewn up a 4x Redball 20rd mag leg panel for a customer in 500D Nylon pack cloth in Mossy Oak New Breakup camouflage;

Velcro retention straps

1.5″ buckles and straps for all 4 straps

pleated magazine pockets

added eyelets for drainage; painted because the Dritz paint was very fragile

DSCF1592

view of the carrier

DSCF1593

Drainage eyelets

DSCF1594

Velcro retention straps with Olive green pull loops

DSCF1595

Detail of adjusting end with loops for strap retention on leg straps

 

DSCF1596

Detail of belt loops with adjusters pulled at their maximum. Belt loops accommodate up to 2.5″ webbing such as USGI pistol belts or riggers belts.

Redball Magazine plate carrier and pouches

I Modified my black horizontal Redball 20rd magazine chest rig into a basic plate carrier complete with back plate bag; and then I decided to build a couple pouches, first pouch was an attempt at doing a vertical, side by side pouch with bungee cord retention, hated it.. so made a 2nd pouch that is much more conventional; holds 4 20rd magazines in a boxy pouch that is kinked on the sides, and has a center divider, and two 3/4 coverage flaps over each pair of magazine.

17500400_10212676767098725_40685970_o

Front of 4-mag plate carrier

17522021_10212660375568947_1492802446_o

Back of the front carrier

17571301_10212676767018723_1584227163_o

inside of both carriers

17571382_10212660375768952_147266955_o

Side view of front carrier

17571922_10212676767138726_1689016066_o

View of outside of both carriers; the rear carrier has MOLLE strips for attachment of hydration pouch or small gear; or even butt pack on bottom row.

The plate carrier will fit up to 9×12 plates on both front and back. It is basically a simple armor carrier with magazine pockets sewn to the front , and utility/first aid pockets sewn on the sides.

17622557_10212695341283068_589020450_o

My first attempt at a MOLLE 995 20rd pouch for the 20 rd Redball magazines; the idea was to have elastic retention and not a lot of fabric, but it is a failure here, due to the extreme splay and sticking far out away from the platform it attaches to.

17692844_10212695341683078_1823718218_o

Side view of pouch showing the kink and how far away it sticks out

17623062_10212695525247667_417350286_o

good view of how far it sticks out from a MOLLE belt; due to being bottom heavy and not having a lot of retention up top other than the elastic cordage

17571744_10212695525287668_871548173_o

Mounted to the MOLLE belt I have, it is not really good here.

17692700_10212695341563075_1533369089_o

Back view of the pouch showing Tactical Tailor styled MOLLE webbing for use with TT  Short MALICE clips.

17670768_10212711122917599_1884595210_o

pattern blank cut up, then hemmed with edge tape for 2nd MOLLE pouch in Coyote Brown

17670607_10212711842335584_829307077_o

All done except some details; 1″ ITW buckles in Tan-499 color, khaki webbing straps

17693173_10212712153463362_800367116_o

Mounted to the MOLLE belt

17622289_10212712154623391_1155258031_o

Finished 3/4 coverage flaps on the top using 1.5″ webbing.

17758965_10212712154463387_751759966_o

Another view of the top half; mounted by the same MALICE clips and same style webbing on the back of the pouch, as the pouch retains the magazines better; the whole thing is far stabler and easier to use.

17758970_10212712153343359_55155911_o

Side view showing the kink in the side panels to accommodate the Redball magazine shape

 

 

 

Coyote tan 8-cell 995 rig and black Plate carrier rig

Built a Coyote tan 8-cell vertical mag rig for 4 Redball 20rd mags, and 4 10rd Factory 995 mags, and then built a 5 20rd, 5-10 10rd vertical Plate Carrier clip-on rig for two customers!dscf0881

On olive green fabric, showing the tan X harness, tan webbing and mags loaded.

dscf0882

Compared to fishing belt kit with Coyote pouches

dscf0884

Against 330D Multicam fabric

I also modified a customer’s black slick plate carrier to accept the black 8 cell vertical rig, and built a new 10 cell direct-attach rig. I added 4x Fastex buckles to the Plate Carrier, this was the least invasive method for the user, did not need to rip seams to attach buckles

20160714_162007

Front of Plate Carrier showing the two upper buckles

 

20160714_161938

Back of plate carrier, showing the top 2 45 degrees buckles for the diagonal webbing

20160714_162830

Loaded up and attached to rig on mannequin. Front view.

20160714_162850

Back 3/4 view, the user utilizes the standard back strap of the chest rig, and the diagonal webbing from the black 8 cell rig goes up to the two 45 degree buckles. THe 8 cell rig is capable of being used on its own with its H harness, and the carrier can keep the buckles fastened/unused.

I made a 5 cell plate carrier rig next, with no snaps, but velcro attachment, back strap attachment, and a simplified upper strap attachment, for direct attachment to the black plate carrier. I overestimated the size of the dividers needed, and now the 5 front cells can have up to 2 9mm Hi Point mags, OR 1 double stack pistol mag in each cell, and the back 5 cells are generously sized for the Redball magazines. With this cleaner panel layout and the size, it does not extend past the edges of the plate carrier.

20160904_173621

Clipped directly and attached to the plate carrier

20160904_173639

Back view of rig, showing the velcro strip for attaching to plate carrier and reversed buckles up top, adjusts from the inside, so as to hide the straps for a clean appearance

20160904_173656

Front 4 cell panel showing velcro flaps and velcro attachment. It looks like I was off on the bottom stitching, but that is a result of not loading the cells with weight, it is even when loaded.

The material used is 500D Cordura in both black and coyote tan.

Chest rigs for Redball 995 mags

Made a couple chest rigs in black 1000D vinyl backed Cordura for the new Redball Magazines for the Hi Point 995/995TS 9mm carbines; First one is a horizontal carrier, with utility pouches that fit 100rd organizer boxes, or other small stuff. The other one is a vertical 8-cell carrier that accommodates 4x 20rd Redball magazines and 4x 10rd factory magazines.

They are based on traditional chest rig designs from China and South Africa, but tailored for the particular magazines.

DSCF0873

Horizontal 4-magazine chest rig with utility pockets on ends, single layer construction and layout is based on a SADF chest rig but with horizontal magazine pockets as opposed to vertical;

DSCF0871

Unloaded, You can see how the magazine shape is unique and does not lend itself to other magazine pouch designs or normal retention methods

DSCF0869

Close up of magazine retention system; hidden snaps and doubled over 1.5″ webbing. I got the idea after looking at one of my knife sheaths and figured that since the ends and mid plates are larger than the magazine body, it would be useful to have a similar retention method, and so far it has worked beautifully.

DSCF0868

Straps snapped in place. I did this set up to make it easy to open and draw with the left hand.

DSCF0874

Detailshot of the utility pocket. They are shallower than the usual SKS/Shotgun ammo pockets I have made, but fits a 100rd 9mm organizer box with some room to spare for tools or keys or other things. Can be used to carry first aid kit as well.

DSCF0875

With my MOLLE MIcro chest rig for pistol magazines and the prototype bandolier made of 420D pack cloth scraps. Yes that is my 995 Classic carbine with Primary Arms 1-4x scope on it.

DSCF0877

My other chest rig, vertical 8 cell magazine carrier, next to the Horizontal one. It is based on a combination of Chi-Com and R.A.C.K. chest rig designs (R.A.C.K. rectangle panel, Chi-Com one piece magazine/clip pocket panel) with two different fastening systems; a simple wrap around retention strap for the 4 Redball magazines, and a narrow flap strap for the 4 factory 10rd magazines. I only own 1 factory 10 round magazine at the moment.

DSCF0878

Close up of the short pouch showing the factory 10 rd magazine. I can also put in a Leatherman multi-tool in the same size pocket. bonus!)

DSCF0879

Detailclose up of the chest rig panel with the Redball magazines fastened in. The flag patches on both of them are from Universal Shooting Sports Forum , wherein I am a member.

DSCF0880

Unloaded except for the one 10 rd magazine. It is a simple rig. I will be making about 6 of these rigs in Coyote Brown with either tan binding tape and webbing or dark brown binding tape and webbing.