Pole mod for the Long Ogee Tarp!

Decided to see how tent pole sections work with the Long Ogee tarp over a hammock!

4 sections of ~21″ tent pole with shock cord; tied to tie outs via Paracord

Long Ogee Tent Pole Mod 1

It looks like the ENO DryFly with doors… only 4 stakes!

Long Ogee Tent Pole Mod 2

Sideways view; I used the green tree straps with hooks for the tarp attachment, and did a truckers hitch on one side to get it taut.

Long Ogee Tent Pole Mod 3

how it looks from the inside, with whoopie sling attached to tree strap;

Long Ogee Tent Pole Mod 4

Sorry for little blurry pic, I couldn’t find my mitten hooks or webbing pockets, so I used the paracord sections to tie the pole sections to the tie outs

Long Ogee Tent Pole Mod 5

View of the interior from the hammock.

Long Ogee Batwing tarp done!

After ordering 6 yards of 58″ wide fabric and 3/4″ crosgrain webbing from [url]www.ripstopbytheroll.com[/url] ; I went and made a longer/larger version of the Ogee Batwing tarp! Took me several hours of cutting, and then sewing the hems and attaching tie outs, but I think the end result is pretty decent! I received 18 feet 8 inches of fabric, so that allowed me a little more latitude for the ridge line length and overall width…

Specs are as follows;

1.1 Oz Khaki Silnylon, 6 yards

16 tie outs of 3/4″ crosgrain webbing, sewn to hems with straight stitches, 4 lines minimum, some tie outs are X-in-box attached (corners and ridgeline tie outs)

overall length, roughly 18 feet 4 inches, width, roughly 11 feet 4 inches

Long Ogee Tarp 1

Set up with poles, I set it up first with one triangle staked down, then the poles, then the final triangle staked down, and then attached guy lines to open up the ends and stake the doors down. In a camping situation, I would start with ridgeline first, and tension it as much as possible, before staking the sides down.

Long Ogee tarp 2

end view

Tieout detail

side tie out detail; it’s stitched right into the hems

Tarp pouch 4.5x4.5x3

Amazingly, the entire tarp all fits into this 4.5″x4.5″x3″ shotgun ammo pouch, also made by me!  No guylines and no stakes, those would travel in a different pouch.

Made my own tarp……learnt new things….

 

Sewn up the material I got from ebay, uncoated woodland ripstop…. after cutting it….well… i did a horrible job cutting it…

the original tarp plan called for an asymmetric hex tarp that used 18 ft of 64″ wide material, and has a 9 ft 9 1/2 inches seam…..with a 12+ ft ridge line…well, somehow I mis-cut somewhere and ended up with a nearly symmetric tarp with the 10 ft 6 inches seam..

Lesson 1; confirm the material’s length. I assumed 6 yards, clearly it is more than 6 yards if the 126″ seam is any indicator… it IS 64″ wide material though.

Lesson 2; get a proper cutting mat big enough and a big enough table……..

Lesson 3; use Catenary curves and cut to curves for maximum tension……
Lesson 4; measure twice, maybe thrice before cutting, and confirm the orientation of the end cuts!
DIY Hex Tarp 1

first set up with seam on diagonal; decent coverage….

DIY Hex Tarp 2quarter view; yes theres floppy edges on the tarp…

DIY Hex Tarp 3view inside…there’s room….its a little wonky looking thing though..

DIY Hex Tarp 4second set up…ridge line is way too long….less coverage too…hmm.

DIY Hex Tarp 5not as much coverage…..although..for the view, it can’t be beat!

DIY Hex Tarp 6Ah that’s more like it! shorter ridge line, 126″ seam, so 126″ ridge line….while theres less end coverage, it still covers the whole hammock, positioned right over the quick links of the hammock suspension to tree straps. And theres more coverage on the sides, so in case of hard rain, it protects more of the person in the hammock!

DIY Hex Tarp 7quarter view, you can see how much wider it is, and how much it covers the ground..

DIY Hex Tarp 8another view, with the black harness clipped to the tree strap. the brown pouch is what holds the tarp, the large green pouch holds the hammock.