Modded harness and redid Yucca light pack set up!

Modded my black harness to provide two attachment points for my small Yucca pack lower straps, and redid the pack set up!

Harness redone 1

Harness without pack

Yucca Pack and Harness

With pack attached

Yucca pack harness

Back view of harness and pack connected; you can see the two extra Fastex buckles being used to connect pack  lower straps to the harness

Yucca Pack hammock kit 2

Side view of the pack; the side pockets are to hold food and misc items.

Yucca pack harness attachment upper detail

detail shot of upper pack attachment, the harness padding part has a couple of metal snap hooks to attach to D-ring equipments.. the harness upper part is from a black M1967 web harness from Rothco I believe.

Yucca Pack lower harness attachment detail 2

detail of the lower pack strap attachment. Its simply a sewn loop strap, girth-hitched onto the D ring.

Yucca pack to Harness lower attachment detail 1

Another detail shot, showing the strap connecting to the buckle which is attached to the harness permanently.

Yucca pack hatchet mount detail

Detail shot of Army hatchet mount between the MOLLE Sustainment Pouch and the main pack

Yucca Pack redone hammock kit 1

shot of pack without the harness.

Harness Right panel detail

Detail of Right-hand panel of the harness.

Load out is as follows;

In the main pack, I have the following items.

Hammock and kelty top quilt in main compartment with Whoopie Slings attached to hammock

USGI CCF pad under top flap

3-4 days worth of clothes in MOLLE Sustainment Pouch

Hatchet in between Sustainment Pouch and Main pack

foods in 3 side pockets, large foods in the USMC Coyote Brown pockets and small foods in one camo pocket, while the final camp pocket holds the tree straps for the hammock and a bandanna and headlamp

Moving on to the harness;

2x 1qt water bottles in MOLLE canteen covers; one is a Nalgene bottle, the other is a Life-line canteen with an Army canteen cup

handgun with ammo

first aid kit in one black pocket

Long Ogee tarp in second black pocket

hammock bugnet in long green pouch

tarp lines and stakes in shotgun ammo pouch (no shotgun ammo)

compass in compass pouch

Mini Maglite behind black pocket

4.5″ blade knife behind other black pocket

Esbit stove and fire kit in third black pocket

snacks and misc items in fourth black pocket

handgun ammo magazines in USGI mag pockets attached to two black pockets

With this load out, the entire kit should be good for 3-4 days of hiking and traveling in the woodlands…

MYOG MOLLE Yucca Pack!

Made a MOLLE version of the Boy Scouts Yucca/ Green Bar Bill Pack; using 1000D DCU Cordura scraps….. Since I wanted a day pack that was in between the size of a Recon Buttpack and the size of a normal Schoolbag or the Medium Ruck sack…plus the ability to add or subtract pouches to it….I looked into my sewing fabrics drawer and out came the DCU Cordura material…I did not have enough width to make the pack the way  I make my pouches, but I had enough material to make a pack a little differently; with two side panels sewn to the main panel.

DSCN2170

Bare pack; with straps undone..yes the flap is ridiculously long, but its for a reason

DSCN2176

Flap opened up to show full height of the panel; 6 rows and 6 slots of MOLLE

DSCN2171

Side of pack; with 6 rows and 3 slots of MOLLE; for attachment of whatever you could want. Could thread cord through some slots and use that to compress the sides if needed?

DSCN2172Bottom of pack with 3 rows and 4 slots of MOLLE, for attachment of either MOLLE Waistpack or lashing straps for gear

DSCN2173

Back of pack without shoulder straps attached. The D-rings are for shoulder straps obviously, but they could also be used to strap to a frame or a larger ruck sack if one wanted to.

DSCN2175

Top of pack, showing the “ear flaps” to keep most weather out. I might add snaps to the edges to seal better…

DSCN2174Its like a cave of T-shirts! there’s enough space for up to 3 or 4 days of clothing in there….provided you put the rest of your camp gear outside it…as these next two pics will show!

DSCN2178

All packed up for a summertime/warm weather camp trip! Green sack has my modified Kelty topquilt, and then there’s the freebie Coleman inflatable pad on the bottom…the two squarish pouches holds food, first aid kit, and small batwing tarp. The long horizontal pouch holds tarp stakes, guylines, compass, misc gear.

I have two canteen pouches on this as well;

DSCN2177

The back showing the canteen pouches in use with canteens and cup and canteen stove; and their small pockets hold my Swiss Army Knife, and fire kit. You can see that I am using USGI LC-2 straps for backpacking duty, I could clip the pack to the black webbing harness I have which have two hooks for small packs such as this.

Hope you enjoyed this post!

 

UPDATE on this post! I have more pictures and detail shots of the pack!

DSCN2179

With pad and stuff sack removed, and black shotgun pouch added and small knife attached to MOLLE KA-BAR adapter. It is shown next to the small Recon Buttpack

DSCN2180

Better shot of the side and showing how much the three coyote pockets add to the depth of the pack

DSCN2181

detail shot of attachment of shotgun ammo belt pouch via ALICE to MOLLE adapter

DSCN2182

With green stuff sack up top

DSCN2183

Comparo shot of complete overnight-3 day pack next to large MYOG hiking backpack